Ever wondered why your infusion pump isn’t delivering fluids as expected? It might be due to the clip on your infusion tubing!
The Hidden Culprit
Our technicians frequently encounter a common yet easily overlooked issue: the clip on the infusion pump pipe. When the clip is always positioned at the same spot, it can collapse the pipe, reducing the flow rate of your pump.
Simple Fix, Big Difference
To avoid this problem, make sure to move your clip regularly along the pipe. This simple practice can prevent the tubing from collapsing and ensure a consistent flow rate.
How to Ensure Your Flow Rate is Optimal
You can perform a quick test to check if your infusion flow is accurate. Here’s how:
Flow Rate Check
| Conditions |
|---|
|
Set up your infusion pump with the fluid line. The fluid line preset options in the digiPump include: Hospira, Baxter, VANNET, CONO, ME, etc. |
| Set the infusion rate to 120 ml/h. |
| Run the infusion for 6 minutes. |
| Measure the volume of fluid in the graduate. It should be between 11.5 ml and 12.5 ml. |
Occlusion Alarm Check
| Conditions |
|---|
|
Set up your infusion pump with the fluid line. The fluid line preset options in the digiPump include: Hospira, Baxter, VANNET, CONO, ME, etc. |
| Set the infusion rate to 120 ml/h. |
|
Ensure the occlusion level is set to the specified parameters. Occlusion Level: CME Pump: P5 (525 mmHg / 70 kPa / 0.7 bar / 10.15 psi) Digicare Infusion Pump: Default occlusion level |
| The pump should alarm within 1 minute if there's an occlusion. |
By performing these checks, you can ensure that your infusion pump is delivering fluids at the correct rate and detect any potential occlusions promptly.
P.S.: Don’t forget to calibrate your pump every time you change the fluid line make!
Infusion Pump Not Performing Well?
If your infusion pump still isn’t performing as it should, we can help. Complete this form and send your pump to our repair office for professional maintenance.
So, next time you set up an infusion, remember to move that clip and keep your flow steady!
